Shop
Description
TECHNICAL SPECIFICATION OF CYLINDRICAL GRINDER MACHINE
| ZCG-1 | ZCG-3 | ZCG-3 | ZCG-4 | ZCG-5 | |
| Maximum GrindingLenth | 300 mm | 450 mm | 600 mm | 1000 mm | 1500 mm |
| Maximum Hight of Centres | 128 mm | 145 mm | 145 mm | 150 mm | 225 m |
| Maximum Swing Over Table | 250 mm | 290 mm | 290 mm | 300 mm | 445 m |
| Maximum GrindingDiameter | 200 mm | 240 mm | 240 mm | 250 mm | 400 mm |
| Table Feed | - | Hyd./Mech. | Hyd./Mech. | Hyd./Mech. | Hyd./Mech. |
| Range of Table Feeds Per Minute | In Hydraulic infinitely | Variable/In mechanical | 100-175-275 mm. | 100-175-275 mm. | - |
| Maximum Table Swivel | 9°+3°-12 | 9°+3°-12 | 9°+3°-12 | 9°+3°-12 | 9°+3°-12 |
| Work Head Swivel On Either Side | 90°/30° | 90°/30° | 90°/30° | 90°/30° | 90°/30° |
| Work Spindle Speeds | 3 | 4 | 4 | 4 | 6 |
| Work Spindle Speed Range | 50 to 100 | 60 to 350 | 60 to 350 | 60 to 350 | 28 to 350 |
| Taper in Workspindle | MT-3 | MT-4 | MT-5 | MT-4 | MT-5 |
| Taper in Tailspindle | MT-3 | MT-4 | MT-4 | MT- | MT-5 |
| To and Fro Swivel of Wheel Head Max | 60° | 60° | 60° | 60° | 60° |
| Transverse Movement of Wheel Head Max | 125 mm | 125 mm | 125 m | 130 mm | 200 mm |
| Size of Grinding Wheel | 355x38x127 mm | 355x38x127 mm | 355x38x127 mm | 355x38x127 mm | 450x50x127 mm |
| Min. Dia of Worn Out Wheel | 225 mm | 225 mm | 225 mm | 225 mm | 320 mm |
| R.P.M. of GrindingWheel (Two Range) | 1650/2200 | 1650/2200 | 1650/2200 | 1650/2200 | 1060/1300 |
| Maximum InternalGrinding Depth | 80 mm | 80 mm | 100 mm | 100 mm | 125 mm |
| Min & Max. Dia of Hole For Grinding | 15 to240 mm | 15 to240 mm | 15 to240 mm | 15 to240 mm | 25 to320 mm |
| Wheel Head Motor 1440 R.P.M. | 3 H.P. | 3 H.P. | 3 H.P. | 5 H.P. | 7 H.P. |
| Work Head Motor 960 R.P.M. | 0.75 H.P. | 0.75 H.P. | 0.75 H.P. | 1.75 H.P. | 1.75 H.P. |
| Motor for Table Drive Hyd./ Mech. | 2 H.P. 0.75 H.P. | 2 H.P. 0.75 H.P. | 2 H.P. 0.75 H.P. | 2 H.P. 0.75 H.P. | 2 H.P. 0.75 H.P. |
| Motor for InternalGrinding Attachment | 0.75 H.P. | 0.75 H.P. | 0.75 H.P. | 1 H.P. | 1 H.P. |
| Approximate Weight With Packing | 1200 Kg. | 1400 Kg. | 2000 Kg. | 3500 Kg. | 4500 Kg. |
The Best Cylindrical Grinder Machine Manufacturer In Punjab
1. STANDARD EQUIPMENT OF CYLINDRICAL GRINDER MACHINE
- Collant pump
- Dressing tool holder with tool grinding wheel
- Grease gun
- Oil can
- Dead centres
- Key spanners
- Wheel flange
2. OPTIONAL EQUIPMENT
- (At extra cost) Internal grinding attachment (to be ordered with the machine) SELF CENTRING CHUCKS 5 Independent 4 jaw chucks 6″
- 3 POINT STEADY REST 2 POINT STEADY REST, Revolving centre, Redius truing device, Balancing stand, Balancing mandrel and spare wheel flange.
- (Right reserved for the changes towards improvements in Design & Construction.)
3. We reserve the right to change the design and specification of these grinding machines and their attachments.
- Standard attachments: Coolant pump fitted on tank, Diamond Dresser 2 nos., Oilcan, Dead Center 2 nos., Tool kit.
- Additional attachment extra cost: Internal Grinding Attachment, Balancing Stand, Balancing Mandrel, Three Point Steady Rest, Two point Steady Rest, Radius Truing
- Device, Spare Wheel Flange, Independent Four Jaws Chuck, Magnetic Coolant Pump,Grinding Gauge.
