Shop
Vertical Turning Lathe Machines
SPECIAL ACCESSORIES:
- Additional ram head on cross rail
- Threading head on cross rail
- Coolant system
- Side ram head
- Milling attachment
- Slotting attachment on cross rail
- Dro system
- CNC compatible G
- Anti-friction material coating on sliding surfaces
- Turret head on cross rail
Description
Technical Specification Of Vertical Turning Lathe Machines
| ZURKEN MODELS | UNIT | ZMCVT-1.0 | ZMCVT-1.2 | ZMCVT-1.5 | ZMCVT-2 | ZMCVT-2.5 | ZMCVT-3 | ZMCVT-4 | ZMCVT-5 | ZMCVT-6 |
| Table Diameter Max. Turning Dia with | mm | 1000 | 1200 | 1500 | 2000 | 2500 | 3000 | 4000 | 5000 | 6000 |
| Max. Turning Dia with Side head in working position | mm | 1100 | 1500 | 1700 | 2500 | 2800 | 3500 | 4500 | 5500 | 6500 |
| Max. working height under cross rail | mm | 1000 | 1200 | 1200 | 1700 | 1700 | 2200 | 2200 | 2500 | 2500 |
| Vertical Travel of Ram Head | mm | 500 | 600 | 600 | 700 | 800 | 900 | 1000 | 1000 | 1000 |
| Swivel Angle of Ram Head | 30" | 45 | 45 | 45 | 45 | 45 | 45 | 45 | 45 | 45 |
| Horizontal Travel of Side Head | mm | 600 | 600 | 600 | 700 | 800 | 900 | 1000 | 1000 | 1000 |
| Max. Vertical Travel of Side Head | mm | 1000 | 1000 | 950 | 1250 | 1250 | 1750 | 1750 | 2000 | 2000 |
| Table Speeds | RPM | 10-100 | 9-90 | 8.5-85 | 5-50 | 2-20 | 1.5-15 | 1.5-15 | 1-10 | 1-10 |
| Feeds, Horizontal &Vertical | No. | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Range | mm/min | 0.3-2.3 | 0.3-2.3 | 0.3-2.3 | 1-6.5 | 1-6.5 | 1-6.5 | 1-6.5 | 1-6.5 | 1-6.5 |
| Main Motor | H.P. | 15 | 15 | 20 | 25 | 30 | 40 | 40 | 50 | 60 |
| Approx Weith OfMachine | M.T. | 12 | 13.5 | 15 | 21 | 25 | 35 | 45 | 55 | 70 |
Specifications are subject to alteration and improvement without notice.
Standard Accessories
- One Ram Head on Cross Rail
- 4 Jaw Chuck
- Automatic Lifting & Lowering of Cross Rail
- Lubrication System on All Sliding Ways
- Centralized Control Station With Interlocked Electrical Control Pannel
- A Set of Service Tools
